您好,欢迎光临Anhui Hanguan Environmental Technology Co., Ltd官方网站！
0553-8363354
扫一扫 添加微信
After the frost, the cleaning workers and sanitation workers ushered in the busiest season of the year. The fallen leaves and dust on the floor need to be cleaned up little by little. But in recent years, thanks to the addition of large sweeping cars, the sense of tiredness of cleaning workers has been greatly reduced. The use of large sweeping vehicles not only saves costs, but also saves time, allowing cleaning workers to have more rest time.
Many advantages make the large sweeping car a common cleaning tool. How to use and maintain it has also become a must for cleaning workers to learn before they go on duty.
Now let's talk about the use steps of the large sweeping car, so that you can quickly get the operation method of the sweeping car, and better work.
Learn to use a large sweeping car in five steps
Step 1: Start the power supply
Insert the switch key and turn it to the ON position. The electricity meter immediately displays, the warning light starts to flash, and the whole vehicle has been powered on.
Step 2: Whole vehicle walking
After starting the machine, check whether the hand brake is pulled up. Turn the master switch to drive forward or backward as required. Step on the accelerator pedal with your foot, and the sweeper can walk.
Step 3: Sweep the floor
Press the cleaning switch, each motor starts to rotate, and the main brush and side brush will automatically lower to clean the garbage on the ground. (Note that the road surface needs to function according to the rainy day if there is ponding or rainy day)
Step 4: Turn on the vibration dust
During the sweeping process, it is necessary to vibrate the dust for 20-40 seconds every 15-30 minutes. As long as the key of dust vibration function is pressed, the sweeper stops on a flat road, and the vehicle will clean the dust inside by itself.
Step 5: Sweep the floor
Turn off the cleaning button, raise the main brush edge brush, turn on the vibration dust, wait for 30-40 seconds, pour out all the materials in the dustbin, finally pull up the hand brake and pull out the switch key, and the sweeping is completed.
The operation of the large sweeping car is very simple. I'm afraid you can't remember the tedious steps, so I use these simple five steps to tell you simply. I hope you can remember more firmly.
中文
EN
